Start with three tools, not a cabinet full
A clean espresso station comes down to matching the right tool to the right mess. You need something small and firm for the group head and portafilter, something absorbent for steam wands and stainless steel, and something with reach for the counter around the machine. The Urnex Scoopz Espresso Brush, the ECM Barista Towel, and the Revolution Counter Brush in Walnut cover those three jobs without overlap.
The routine below is built around what these tools are actually designed to do. Where the supplied product information does not confirm a detail—like exact drying times or chemical compatibility—this guide says so rather than guessing.
The brush that goes where residue hides
- Urnex Scoopz Espresso Brush: Urnex Scoopz Espresso Brush is specifically made for espresso machine cleaning tasks and helps remove coffee oils and residue from hard-to-reach areas. Group heads and portafilters have crevices that a cloth cannot reach. A dedicated espresso brush lets you scrub those spots as part of daily maintenance.

Urnex Scoopz Espresso Brush - Urnex Scoopz Espresso Brush: Designed for scrubbing group heads, portafilters, and other espresso components. This tells you where the brush is intended to be used, so you can keep it in the espresso workflow rather than treating it as a general-purpose scrubber.
A simple daily cleaning sequence
Do these steps in order while the machine is cool enough to touch safely. The supplied information does not include temperature or timing instructions, so use your machine maker's guidance for backflushing and deep cleaning.
- Brush the group head and portafilter: Use the Urnex Scoopz Espresso Brush to scrub the group head, portafilter, and other espresso components. Its stated purpose is removing coffee oils and residue from hard-to-reach areas, which makes it a fit for daily maintenance.
- Wipe stainless steel and the steam wand: The ECM Barista Towel is a 3-in-1 microfiber towel made in Germany. It is designed to absorb liquid and is described as suitable for cleaning stainless steel housing, steam wands, and portafilters without chemical additives. Use it after brushing to pick up loosened residue and moisture.
- Sweep the counter around the machine: The Revolution Counter Brush has boar-hair bristles and a wide flare design. The record says it is safe to use on stainless steel surfaces and measures 9 inches in length, with a leather tie for hook storage. Use it to clear grounds and dust from the countertop around your coffee bar.
What the ECM Barista Towel is built for
- ECM Barista Towel: Made in Germany, this 3-in-1 microfiber towel is designed to easily absorb liquid and is described as perfect for cleaning stainless steel housing, steam wands, and portafilters without the need for chemical additives. That makes it a good fit for the wipe-down step after brushing, especially on stainless panels and the steam wand where you want absorption without extra products.

ECM Barista Towel - ECM Barista Towel: The product measures 15.8in by 15.8in. A towel this size gives you enough surface area to wipe down the machine and portafilter area before it becomes saturated.
Where the counter brush earns its place
The Revolution Counter Brush is not an espresso-machine brush. Its boar-hair bristles and wide flare design are described as more pliable than synthetic bristles and useful for narrow or tough-to-reach places on the counter. The record confirms it is safe on stainless steel and measures 9 inches long, but it does not state whether the bristles are safe for direct contact with the group head or portafilter. Keep it for the counter and surrounding surfaces unless your machine maker says otherwise.
The leather tie is a small detail that matters in daily use: it lets you hang the brush within reach instead of digging through a drawer with wet hands.
Counter brush details worth knowing
- Revolution Counter Brush in Walnut: Boar-hair bristles with a wide flare design, described as significantly more pliable than synthetic bristles and ideal for cleaning even the most narrow or tough-to-reach places. That flexibility helps around the base of the machine and along counter edges where grounds collect.
- Revolution Counter Brush in Walnut: Measures 9 inches in length and is safe to use on stainless steel surfaces; includes a leather tie for hook storage. The length gives you reach across the counter, and the stainless-steel suitability means you can use it near the machine housing without worrying about the surface.
Keeping the tools themselves clean
A cleaning tool that stays dirty just moves residue around. The supplied records do not include washing instructions, sanitizing methods, or drying times for any of these three products, so follow the care guidance that comes with each item. What the records do support is this:
- Rinse and dry the barista towel after wiping: The ECM Barista Towel is designed to absorb liquid. The record does not state machine-washability or temperature limits, so check the product's own care label before laundering.
- Keep the espresso brush for espresso only: The Urnex Scoopz brush is specifically made for espresso machine cleaning tasks. Reserving it for the group head and portafilter keeps it from picking up counter grit.
- Store the counter brush on its leather tie: The Revolution Counter Brush includes a leather tie for hook storage. Hanging it keeps the boar-hair bristles from being crushed and keeps the brush off wet countertops.
What this routine does not cover
These three tools handle brushing, wiping, and counter sweeping. They are not a substitute for backflushing, descaling, or any cleaning step your espresso machine manufacturer specifies. The supplied product information does not include chemical compatibility, sanitizing claims, or replacement schedules for any of the items, so treat the routine above as the surface-and-workflow layer of your cleaning plan and follow your machine's manual for the rest.




