Back to Blog
How-to Guides 2026-11-20 Whole Latte Love Canada 0 views

How to Use the Crem ONE PROFILER Dual Boiler for Profiling

How to Use the Crem ONE PROFILER Dual Boiler for Profiling

Learn how to use the Crem ONE PROFILER dual boiler espresso machine's pressure profiling system, including manual and programmed profiles, and key features for consistent extraction.

What Makes the Crem ONE PROFILER Different

The Crem ONE PROFILER is a reservoir-only dual boiler espresso machine with an E61 group and a variable speed DC voltage rotary pump. Its key feature is brew pressure profiling, which can be controlled manually via a knob or executed from programmed profiles. Because it is reservoir-only, incoming water line pressure does not affect the profiling system, giving you full control over brew pressure during extraction.

Key Specifications for Profiling

  • Crem ONE PROFILER Dual Boiler Espresso Machine: Brew pressure range: 1.5 bar up to 12 bar at max pressure, adjustable in 0.2 bar increments. This wide range and fine increment allow you to mimic pre-infusion, lever-style shots, or counteract bitter coffees.
    Crem ONE PROFILER Dual Boiler Espresso Machine
    Crem ONE PROFILER Dual Boiler Espresso Machine
  • Crem ONE PROFILER Dual Boiler Espresso Machine: Up to 5 unique extraction profiles can be named and stored in the menu. Additional profiles can be stored digitally and entered via USB drive. You can save your favorite profiles and recall them instantly, or experiment with new ones without losing the originals.
  • Crem ONE PROFILER Dual Boiler Espresso Machine: Profiles are measured in ml of water instead of by time, and each step executes consistently regardless of grind size or tamp pressure. Volume-based profiling removes variables like grind consistency, so your shots are repeatable.

How to Create and Use a Programmed Profile

Follow these steps to set up a programmed profile on the Crem ONE PROFILER.

  1. Access the profile menu: Use the machine's digital controller to enter the menu. You can name and store up to 5 profiles.
  2. Set each step by volume: Define each step of your profile in ml of water. The pump will not change speed until the set volume has been delivered.
  3. Save and name the profile: Give your profile a name for easy identification. Repeat for up to 5 profiles.
  4. Execute the profile: Select your saved profile and start brewing. The machine automatically cuts the pump when the desired volume is reached, alerting you to lower the brew lever.

How to Use Manual Pressure Profiling

For hands-on control, use the manual profile knob located on the bottom left of the machine.

  1. Turn the knob during extraction: The knob provides tactile feedback with an audible click. Adjust brew pressure in 0.2 bar increments as the shot runs.
  2. Observe the shot mirror: The angled shot mirror built into the front panel lets you watch bottomless shots for visual feedback.
  3. Experiment with pressure ranges: Use low pressure (1.5–3 bar) for gentle pre-infusion, and higher pressure (up to 12 bar) to simulate lever machines or balance bitter coffee.

Additional Features That Support Profiling

The PROFILER includes dual PIDs for independent temperature control: brew temperature adjustable between 176°F–212°F and steam temperature between 176°F–257°F. The near-silent rotary pump operates at 1.3 bar during steaming. A 7-day on/off timer lets the machine be ready when you are. The large drip tray has a removable center panel to accommodate an espresso scale or taller cups, and the boiler drain feature allows emptying the brew boiler directly into the drip tray—useful if the machine will be idle or transported.

Related Articles

Customer Service
Home
Products
Cart
Profile